THE FLEETI BLOG
Fuel consumption of construction machinery: what your budget does not tell you
On civil engineering sites, some fuel burns without producing work: where this non-productive use comes from, its cost and how to measure it.
AT A GLANCE
The topic: the non-productive fuel consumption of construction machinery, in other words the litres burned without producing any work, which civil engineering companies’ fuel bills do not reveal.
Sources of loss: engines left running while waiting for materials or instructions, prolonged idling and discrepancies between declared refuelling volumes and the gauges. Fuel accounts for nearly 42% of a machine’s operating costs according to Equipment Watch, and an overrun of 10 to 12% can swallow a site’s margin, particularly in sub-Saharan Africa.
How to reduce it: measure consumption machine by machine, distinguish working hours from idling hours and match each refuelling against the actual tank level. Civil engineering companies that instrument their fleet see consumption fall while activity remains constant.
With Fleeti: Fleeti, the SaaS fleet management and telematics software founded in 2020, measures the consumption and activity of each vehicle and machine. More than 1,000 clients use it, with 40,000 connected vehicles and machines and local teams in 7 countries, including Senegal, Côte d’Ivoire, Morocco, Burkina Faso and Tanzania.

On a civil engineering site, the fuel bill shows how many litres were bought, not how many were actually used to get work done. Part of the fuel consumed by construction machinery burns without producing anything: engines left running during waiting times, prolonged idling, refuelling discrepancies. This common phenomenon is rarely measured, and it costs far more than you might think.
Some figures get signed off without really being looked at. In a civil engineering company, fuel is often one of them. The bill arrives, it is within budget or close to it, and everyone moves on.
That is understandable. When you are juggling sites, teams, deadlines and tenders all at once, you have to pick your battles. Fuel seems like an unavoidable expense: a constraint, not a lever. Except that this reasoning comes at a high price.
Why does the fuel budget not show the real spending on construction machinery?
The fuel bill gives the total volume consumed, but not the share that actually produced work. Yet fuel is a machine’s largest item of expenditure: according to an Equipment Watch analysis published in 2022 by Equipment World, it accounts for nearly 42% of the operating costs of construction machinery, ahead of maintenance, parts and labour.
That is considerable. And yet, in most civil engineering companies, no one is really able to answer a simple question: how many of those litres actually produced value?
What share of the fuel consumed is genuinely productive?
This is not about total consumption: that answer is already on the bill. It is about the productive share, the share that corresponds to earthworks completed, trenches dug and materials compacted. The difference between the two is called non-productive consumption. In fleets with little instrumentation, it is far from negligible.
Where does non-productive fuel consumption on a construction site come from?
Non-productive consumption comes mainly from two sources: machines running without working, and refuelling discrepancies. An engine that is running is not necessarily an engine that is working. On an active site, machines spend a significant share of their time waiting for materials, instructions or coordination that is slow to come.
Engine running, fuel consumed, value produced: zero. Yet this dead time can be measured: tracking idling time per machine and per operator makes it visible, site by site.
On top of this, there are refuelling discrepancies. The volumes declared do not always match the gauges: this is precisely what an anti-theft solution for fuel and assets makes it possible to check. Over a year and across a fleet of ten or more machines, these small slippages end up adding up to sums that few site managers would imagine.
Why is the problem more pronounced in sub-Saharan Africa?
It is not a question of ill will, but of visibility. These situations exist all over the world: industry studies by Caterpillar, McKinsey and Geotab document them. In sub-Saharan Africa, they are amplified by the distance between sites and decision-making centres, and by the lack of tracking tools that is still widespread in the sector.
For a broader view of the subject, read our analysis of the weight of fuel in the costs of African fleets and of the constraints specific to fleet managers in West Africa. Our guide on optimising fleet costs in Africa with data details the method.
What is the impact of fuel overruns on the margin of a civil engineering project?
A fuel overrun of 10 to 12% on a site, within the range commonly seen in fleets without instrumentation, can swallow a decisive share of the expected net margin. On some projects, it wipes it out entirely. This is what many finance directors discover too late.
This is not a theoretical scenario. It is a documented, quantified and entirely avoidable mechanism.
How can you reduce the fuel consumption of construction machinery?
To reduce the fuel consumption of construction machinery, you first need to measure it precisely, machine by machine. The companies that have made this choice have seen significant reductions in less than a year, without scaling back their activity or making a massive investment: simply by using data.
In practice, measuring fuel consumption machine by machine makes it possible to distinguish the hours when a machine is working from those when it is running idle, and to match each refuelling against the actual tank level. Civil engineering companies find these features in a fleet management solution dedicated to construction.
Tracking the engine hours and activity of each machine complements this measurement by showing where and when the equipment is actually running. This is what Droploc, a construction equipment rental company, uses to monitor the days actually worked by its 35 machines.
What does the Fleeti study on fuel use on civil engineering sites in Africa contain?
Fleeti’s study shows that fuel losses on civil engineering sites stem less from the volume consumed than from its non-productive share: waiting with the engine running, prolonged idling and refuelling discrepancies. It puts a figure on each of these sources of loss and explains why sites in sub-Saharan Africa are the most exposed. Above all, it shows in concrete terms how civil engineering companies have regained control of their fuel and turned a silent leak into a performance lever.
It draws on data published by McKinsey, the World Bank, Caterpillar and Geotab. It is written for fleet directors, site managers and the heads of civil engineering companies in Africa, and it is free.
→ Want to find out more about this topic? Send us a message and we will send you our analysis free of charge.
What is the non-productive fuel consumption of a construction machine?
Non-productive fuel consumption refers to the litres burned by a construction machine without producing any work: engine running while waiting for materials or instructions, prolonged idling, discrepancies between declared refuelling volumes and the gauges. The fuel bill does not show it: only machine-by-machine measurement makes it visible.
