THE FLEETI BLOG

Connected vehicles: the data your fleet can already use

Manufacturer, device or sensor, Data Act, CNIL: the data a fleet reads on each vehicle and the rules governing its use.

Illustration of a satellite icon, for connected vehicle data

A connected vehicle remotely sends its position, mileage, consumption and engine alerts, and a fleet can use them as soon as the manufacturer opens them up to its platform. The Data Act, applicable since 12 September 2025, gives the user of a connected product, tenants included, free access to this data (European Commission).

Most recent cars and vans already have a communication module on board. On Fleeti Telematics, more than 40,000 vehicles and machines are connected (Fleeti data, 2026). The route to the data depends on the asset: a recent van sends its data through its manufacturer’s interface, while a trailer or an older machine needs a device or a sensor. Coverage also varies from one model to another, and tracking a driver’s location remains regulated by the CNIL, the French data protection authority.

Connected vehicle: a definition applied to a fleet

A connected vehicle has a communication module on board that sends measurements to a server over the mobile network. For a fleet, the value lies in collecting these measurements automatically on every vehicle, with no input from the driver, and then bringing them together in a single management platform.

Data leaves the vehicle, passes through a server, then reaches the manager in the form of trips and alerts.

Manufacturer-originated connection

Recent vehicles send back their data through the telematics installed at the factory. The manufacturer receives the measurements on its servers and passes them on to authorised platforms, with no additional hardware and no visit to the workshop. Coverage depends on the partnerships the platform has built with each brand.

Older vehicles, trailers and machinery

An older vehicle, a trailer or a piece of construction machinery does not always have a usable manufacturer connection. A device or a standalone sensor then takes over. A company’s real fleet often includes both cases.

What data does a connected vehicle send back?

Four families of data come back from a vehicle: position and trips, energy used, technical condition and driving behaviour. The exact list depends on the make, the model and the subscription taken out with the manufacturer. The platform receives them time-stamped and attaches them to the vehicle’s record.

Position, trips and mileage

The platform records the position, reconstructs each trip and totals the kilometres. It also picks up stops, their length and hours of activity. Mileage taken from the odometer replaces the driver’s declaration, whose discrepancies distort servicing plans as well as lease contracts.

Fuel, charge level and charging

A combustion-engine vehicle sends back its consumption and its tank level. An electric vehicle transmits its state of charge, its range and its charging sessions. Cross-checking with fuel cards reveals inconsistent fill-ups and volume discrepancies.

Engine diagnostics and servicing alerts

The vehicle’s control unit reports engine alerts, warning lights and wear indicators, as well as the distance remaining before the next service. A fault code received before the garage visit leaves time to order the part and plan the downtime.

Driving events

Braking, acceleration, speeding and collisions are time-stamped. Some models add anti-theft status and seat belt use. The list of available events depends on the make and the subscription taken out.

Can your company access the data from its connected vehicles?

Yes. Since 12 September 2025, the Data Act gives a company that uses a connected vehicle, whether it owns or leases it, free access to the data it produces. The manufacturer must provide this data to the company or pass it on to the fleet management platform it chooses.

The European Commission cites the connected car among the products concerned. The text sets the right of access but leaves each manufacturer to choose the format and the interface, so implementation differs from one brand to another.

Vehicles on long-term lease

A fleet on long-term lease (LLD) has the same rights as an owned fleet. The regulation expressly lists lessees and finance leasing among users (recital 18). Before activating collection, check in your contract whether the lessor is involved in the transmission of data.

Passing data to your management platform

You either collect the data yourself or ask the manufacturer to send it directly to your fleet management platform. The text sets only one limit on its use: it cannot be used to design a product that competes with the original vehicle.

Data sources: manufacturer interface, device and sensors

A fleet platform receives data from three sources: the manufacturer’s interface, with no installation; a device plugged into the vehicle; and a standalone sensor for equipment without an engine. A mixed fleet combines these sources and shows all its assets on the same dashboard.

Source

Assets concerned

Typical data

Point to watch

Manufacturer interface

Recent cars and vans, some machinery

Position, mileage, energy, alerts

Level of detail specific to each brand

Device on OBD port or CAN bus

Older vehicles, brands not covered, machinery

Position, engine hours, consumption, fault codes

Installation on each asset

Standalone sensor

Trailers, skips, equipment with no engine power

Position, temperature, opening

Data limited to what the sensor measures

Manufacturer interface: 35 brands at Fleeti

On the Fleeti platform, 35 brands send back their data without a device, including 30 for cars and vans and 5 for machinery (Fleeti data, 2026). The device-free connection through manufacturers is activated remotely, with no work on the vehicle.

Device on OBD port or CAN bus

The device plugs into the vehicle’s OBD diagnostic port or its CAN bus. It reads data from the control unit, without depending on agreements between a platform and a manufacturer. It equips older vehicles and brands that are not covered.

Standalone sensor for trailers and skips

A trailer without an engine powers no device and sends nothing through the manufacturer interface. A battery-powered standalone sensor transmits its position or its temperature, as with geolocation of trucks and their trailers.

What data does a connected vehicle send to a fleet?

A connected vehicle sends four families of data: position and trips, energy used, technical condition and driving events. The detail varies by make, model and subscription. Since September 2025, the Data Act gives the user company, tenants included, free access to this data.