THE FLEETI BLOG
Truck geolocation: how it works, cost and regulations
How does truck geolocation work? Discover the connection methods, costs and CNIL rules for your fleet.

Truck geolocation makes it possible to track its position, retrieve its trips and better manage fleet operations. The system generally relies on a telematics device that sends data to a management platform. Its cost depends on the hardware, installation, subscription and the features chosen.
For a haulier, a construction company or an equipment rental firm, the choice is not limited to GPS accuracy. You also need to decide how to connect the vehicles, which data to use and which rules to follow.
Fleeti centralises geolocation data for vehicles, trailers and machinery on a single platform, to make fleet tracking and the management of operations easier.
How does truck geolocation work?
A geolocation system determines a truck’s position using satellite signals, then sends the information to a platform over the mobile network. The fleet manager can view positions, trip history and the data available depending on the equipment installed.
It rests on three elements:
The GNSS receiver: it calculates the vehicle’s position from the signals of several satellites. GPS is one of the satellite navigation systems used for this purpose.
The means of transmission: a telematics device fitted with a SIM card sends the data over the mobile network. A manufacturer connection can also send the vehicle’s data without adding a device.
The management platform: it displays the information on a map, keeps the history according to the settings defined and allows alerts to be configured.
The data available varies with the vehicle, the connection method and the features subscribed to. Position can in particular be associated with time, speed, mileage or ignition status.
How accurate is truck geolocation?
Accuracy depends on the receiver, the availability of satellite signals and the environment. According to GPS.gov, high-quality single-frequency civilian GPS receivers can reach a horizontal accuracy of 1.82 metres or better 95% of the time. This value is not a guarantee for all geolocation devices.
On the road, buildings, bridges, trees or underground structures can degrade reception. Actual accuracy therefore depends on the hardware used and the conditions the truck is in.
For a business fleet, transmission frequency also matters: positions sent back at short intervals allow more detailed tracking than spaced-out transmission.
Source: GPS.gov, GPS accuracy.
What happens when the truck loses network coverage?
GPS can continue to determine the truck’s position even when the mobile network is unavailable. However, the platform does not necessarily receive new positions in real time.
Some devices store data locally and send it when the connection returns. This feature is worth checking for fleets that travel in rural areas, on remote sites or in regions where mobile coverage is limited.
How do you power a geolocation system?
A telematics device installed on a truck can be powered by the vehicle’s battery. For a trailer or equipment with no permanent power, a standalone battery-powered device may be better suited.
The hardware’s battery life, the frequency of readings and the conditions of use then influence the rate at which data is transmitted.
Which connection methods should you choose for a truck fleet?
There are three main ways to connect trucks, trailers and machinery: connection to manufacturer data, the telematics device and the standalone IoT sensor. The choice depends on the age of the fleet, the equipment available and the information sought.
Manufacturer connection through an API
The manufacturer connection makes it possible to retrieve the available data directly from the manufacturer, through a software interface called an API. It generally avoids installing an additional device and taking the vehicle out of service for the operation.
Its availability does, however, depend on the make, model, connected services and the data accessible. It therefore does not necessarily cover a whole fleet, in particular older vehicles, some trailers or construction machinery.
The telematics device
The telematics device is installed on the vehicle to send the data needed for fleet tracking. It is a solution for vehicles that do not have a usable manufacturer connection or when additional features are needed.
Depending on the hardware and the platform, it can in particular make it possible to track positions, kilometres driven and usage data. Some solutions also offer additional features, such as driver identification or remote immobilisation.
The standalone IoT sensor for trailers and machinery
A standalone IoT sensor makes it possible to locate equipment that has no permanent power supply. It can be installed on a trailer detached from its tractor unit, a skip or a machine parked on a site.
To preserve the battery, these devices generally send data less often than continuously powered devices. They are particularly useful for finding a piece of equipment and for receiving an alert when it enters or leaves a zone.
Can you combine several connection methods?
Yes. A fleet made up of recent trucks, older vehicles, trailers and machinery can combine several connection methods.
The manufacturer connection can cover compatible vehicles, while devices or standalone sensors complete the setup. The aim is to centralise the available data in a single interface, without imposing the same connection method on all equipment.
How do you geolocate a commercial truck?
To geolocate a commercial truck, you can use data sent by the manufacturer, install a telematics device or use a standalone sensor for certain types of equipment. Positions are sent to a platform that lets you follow movements and trip history. The choice depends on the vehicle, the data available and the fleet’s needs. In France, when the system makes it possible to track an employee, its use must comply with CNIL rules, in particular on informing drivers and on collection outside working hours.
